Removing And Installing Blades - Bosch GCM18V-08 Instrucciones De Funcionamiento Y Seguridad

2610051914.qxp_GCM18V-08 6/24/19 1:56 PM Page 16

▶ Removing and Installing Blades

▼ REMOVING BLADE
▼ INSTALLING 8-1/2" BLADE
smaller than 8-1/4" diameter and 5/8" arbor. The
blade's maximum plate thickness is 0.070".
(RPM) or greater.
counterclockwise
interfere with the table insert at 0° and 45° bevel
positions. Lower the blade into the blade slot and
check for any contact with the base or turntable
structure. If the blade contacts base or table,
seek authorized service.
Assembly
35
To avoid injury, do not use a
blade larger than 8 - 1 ⁄ 2 " or
To reduce risk of injury, use
saw blade rated 4600/min
After installing a new blade,
make sure the blade does not
Fig. 3
Outer Washer
Blade Bolt
16
Blade
Rotation
Arrow
Blade Bolt
Fig. 4
Saw Blade
Inner Washer
Arbor Shaft
Support Ring