Schulz AGE 250 Manual De Instrucciones página 52

3.2. AGE 250:
• Ensure that the adequate guard has been properly positioned.
• Place the nylon spool I on shaft A, press and turn the spool clockwise until it locks.
3.3. Other models:
• Ensure that the adequate guard has been properly positioned.
• Place the nylon spool I on shaft A, press the two latches on the spool and push up until it locks on the shaft.
4. Adjusting the telescopic tube (models AGE 350 / AGE 500):
• By using the telescopic tube regulator 17, it's possible to adjust the length of the tube. Turn counter-clockwi-
se to unlock and adjust to the desired height.
• Then lock it by turning the telescopic tube regulator 17 clockwise (Figures 7.9 and 7.10).
5. Assembling adjustable handle (AGE 500):
• Press the two side buttons, as shown in Figure 7.11, and position the adjustable handle 15 on the slot.
Release the side buttons to lock.
a
FIGURE 7.7
FIGURE 7.9 - MODELO AGE 350
AJUSTE DO TUBO TELESCÓPICO
FIGURE 7.8
FIGURE 7.10 - MODELO AGE 500
AJUSTE DO TUBO TELESCÓPICO
b
FIGURE 7.11
52