Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet DJ SCORPION Storm RGBY Manual De Usario

Operation

4. Operation
This product is not designed for continual use. Make sure there are regular breaks during operation to
maximize the life of the lasers. Always disconnect the Scorpion Storm RGBY from power when not in use.

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list or increases a selected numeric value
<DOWN> Navigates downwards through the menu list or decreases a selected numeric value
<ENTER> Enables the currently displayed menu or sets a selected value into the selected function

Menu Map

Mode
Auto mode
Sound sensitivity
Slave mode
DMX mode
Remote control

Configuration (DMX)

The Scorpion Storm RGBY works with a DMX controller. Information about DMX is in the CHAUVET DMX
Primer, which is available from the Chauvet website:
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some of the product's channels could be
restricted.
The Scorpion Storm RGBY uses 5 and 7 DMX channels, which defines the highest configurable address to
506.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 001–506 shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the starting address.
3. Press <ENTER>.
Scorpion Storm RGBY User Manual Rev. 1
Programming Levels
ALL, GbY, rbY, rGY,
AuF rGb, bY, GY, Gb, rY, rb,
rG, Y, b, G, r, rdM
ALL, GbY, rbY, rGY,
AuS rGb, bY, GY, Gb, rY, rb,
rG, Y, b, G, r, rdM
Sou S 0–9
SLV
001–506
rEM
Description
Auto program (fast)
Auto program (slow)
Sound sensitivity
Slave mode
Selects DMX starting address
Wireless remote control
(Does not work in Slave and DMX modes)
Page 9 of 52