Tabla de contenido
Publicidad
SECTION V. UTILITY AND DECORATIVE
STITCHES
Blind Hem Stitch
Machine setting
_i_ Stitch selector:
_2_ Stitch length:
_3_ Needle thread tension:
_4_ Presser foot:
EorF
2-3
2-6
Blind hem foot: G
Use the same color thread as the fabric.
On heavy weight fabrics that ravel, the raw edge should
be overcast first.
Fold the hem, as illustrated.
_i_ Wrong side (Bottom side) of fabric
_2_1/4"-7/16" (0.4-0.7 cm)
_3_Heavy weight fabric
_4_Light weight fabric
f
@
• To sew
_5_ When the needle comes to the left
_6_ When the needle comes to the right
_7_ Guide
_8_Folded edge
There is a sliding guide screw on the blind hem foot that
allows you to precisely control where the needle pierces
the edge of the fabric fold. Adjust the screw so that at the
leftmost position of the stitch, the needle just pierces the
edge of the fold. If the needle pierces too far left, the
stitches will show on the right side of the fabric. Lower the
presser foot. Sew, guiding the folded edge along the guide
_7_in the foot. As you sew, the right side of the stitch
forms a chain stitch to the right of the fabric fold.
48
Publicidad
Tabla de contenido
