Bluetens Duo Sport Manual De Usuario página 116

ELECTRODE PAD
Specification :
ITEM
Size
Thickness
Appearance
Backing material
Gel adhesion
230
STANDARD
49.5±0.5 mm
1.6 + 0.4 mm
No stain, no gel spillover at the edges
White non-woven cloth
Under normal humidity (60%), skin application is above 100
times after 72 hour unprotected storing
Under high humidity (80%), skin application is above 30 times
after 72-hour unprotected storing
Under low humidity (20%), skin application is above 10 times
after 72-hour unprotected storing
Dried completely at 100°C for 1.5 hours, skin application is
above 5 times
For un-pretreated or sweaty skin, skin application is above
10 times.
Comfortable cutaneous sensation
No edge lift after 2-hour skin application under any condition
Skin adhesion reaction time: No need to press or press for
less than 3 seconds
ITEM
Conductivity After 100 skin application, peel the gel off from the carbon film in
the water and dry it. The impedance is <200ohms between
any two points
A.C. impedance for gel-to-metal by LCR meter:
<100ohms at 100Hz;
<70ohms at10,000Hz; <65ohms at100,000Hz
Lead wire Adaptable to male pin from 1.95~2.10m
Strength between leadwire and connector is min. 4kg pulling force
Strength between leadwire and electrode pad is min.3.kg pulling
force
Adhesive force Gel is strongly attached to the carbon film, hard to peel it off
Protective liner 110X110mm, 0.075mm transparent release liner, no gel residue
when peel the electrode off
Printing Lot number & expiry date: firm and legible
Safety Biocompatibility of the gel G607 used for this product conforms to
ISO10993-5-10
Package 120±5mmX185±5mm, transparent eco-friendly PE re-sealable bag
Applicable humidity Humidity: 15%~70% Temperature: 0°C~30°C
Shelf life 2-year sealed storage under 30°C, gel color and adhesion remain
unchanged
STANDARD
<80ohms at1,000Hz
231