BEFORE USING YOUR OSTER
Before using your Oster
follow the instructions below:
1. Remove any stickers from the product.
2. DO NOT IMMERSE TEMPERATURE CONTROL PROBE IN WATER.
3. Clean and condition the non-stick surface:
• Make sure the probe is not inserted into the unit; otherwise remove it from the unit.
The cooking plate will only be released from the base once the probe is removed.
Your appliance includes a safety system that prevents that the cooking plate be
removed while the probe is inserted. Wash the cooking plate, drip pan, lid and base
with a soft sponge with hot, soapy water. Rinse and dry them well.
• Place the drip pan, cooking plate and lid back in the base. Set the temperature
control to the off position "OFF" and insert the probe into the unit. If temperature
control probe is not completely inserted, abnormal heating may occur, resulting in
accident or damage.
• To condition the cooking surface, plug the appliance into the appropriate electrical
outlet. Turn the temperature control knob clockwise choosing one of the low
temperature settings. The orange indicator light will illuminate. Allow the unit to
pre-heat until the orange ready light goes off indicating that the selected cooking
temperature has been reached.
• Wipe a small amount of butter or margarine onto the cooking surface, spread slightly
and wipe away any excess.
NOTE: When using the unit for the first time, you may notice a fine smoke haze coming
out from the unit. This is normal. It is due to the initial heating of internal components.
Your Oster
Multi-Function Electric Grill & Griddle is now ready to use and it will not be
®
necessary to condition it again.
USING YOUR OSTER
1. Place the drip pan correctly in the base as illustrated below (see Figure 1).
Warning: To prevent personal injury or property damage, this drip pan must be in place
during cooking.
ELECTRIC GRILL & GRIDDLE
Multi-Function Electric Grill & Griddle for the first time, please
®
ELECTRIC GRILL & GRIDDLE
Figure 1
MULTI-FUNCTION
®
MULTI-FUNCTION
®
En gl is h 4