Applying The Cuff - HoMedics BPW-040 Manual Del Usuario

BPW-040_C--01.indd 13

APPLYING THE CUFF

1. Remove all watches, wrist
jewelry, etc. prior to attaching
the wrist monitor. Clothing
sleeves should be rolled
up and the cuff should be
wrapped around bare skin for
correct measurements.
2. Apply cuff to left wrist with palm
facing up as shown in Fig. A.
3. Make sure the edge
of the cuff is about 1/4"~1/2"
(1 cm) from the palm as
shown in Fig. B.
4. In order to ensure accurate
measurements, fasten the
hook and loop strap securely
around your wrist so there is
no extra space between the
cuff and the wrist as shown
in Fig. C. If the cuff is not
wrapped tight enough, the
measurement values will not
be accurate.
5. If your physician has
diagnosed you with poor
circulation in your left arm,
place the cuff around your
right wrist as shown in Fig. D.
Note: If it is not possible to
use the cuff on your left wrist,
13
2013/1/24 上午10:46