Door Features; Door Rails; Adjustable Utility Compartment - Sears Kenmore ELITE 106 Manual De Uso Y Cuidado

Refrigerador con montaje superior
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DOOR FEATURES
Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word "Accessory."
Not all accessories will fit all models.
If you are interested in purchasing one of the accessories,
please
call 1-800-4-MY-HOME
®.
The door rails may be removed for easier cleaning.
Snap-on
Door Rails
To remove and replace the rails:
1.
Remove the rails by pushing in slightly on the front of the
bracket while pulling out on the inside tab. Repeat these
steps for the other end of the rail.
2.
Replace the rails by aligning the ends of the brackets with the
buttons on the sides of the door liner. Firmly snap bracket
and rail assembly onto the tabs above the shelf as shown.
Drop-in Door Rails
To remove
and replace the rails:
1.
2.
Remove the rails by pulling straight up on each end of the rail.
Replace the rails by sliding the shelf rail into the slots on the
door and pushing the rail straight down until it stops.
To remove
and replace
bins:
1.
Remove the bin by lifting it and pulling it straight out.
2.
Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
The utility compartment
and tray slide from one side to the other
for more flexible storage. The tray fits on either side of the utility
compartment
or partially underneath it. Try moving it to different
positions to find the option that works best for you.
TO install
and adjust
the utility compartment
and b'ay:
1.
Insert the front of the utility tray into the slot on the back of
the shelf rail. Lower the back of the tray into position.
2.
Place the front of the utility compartment
on top of the shelf
rail. Lower the back of the compartment
onto the ribs on the
refrigerator door.
3. Adjust the utility compartment
by lifting the front slightly and
sliding it to the desired position. Lower the front to lock it into
place.
The shelf bottom flips up so you can store taller items in the door
shelf below. When in the down position, the shelf is strong
enough to hold up to 10 Ibs. (4.5 kg).
15

Publicidad

Tabla de contenido
loading

Tabla de contenido