Purpose Of Use; Work Area Safety - Beta 1465 Manual De Uso E Instrucciones

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS FOR ENGINE EFFICIENCY TESTER ITEM 1465 MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users.

PURPOSE OF USE

- The engine efficiency tester allows endothermic engines to be compressed:
• Testing compression in both petrol and diesel engines
- The reversible air ratchet must not be used for the following operations:
• use outside the technical specifications contained in the TECHNICAL DATA table;
• use in humid or wet environments, or in bad weather;
• use for any applications other than the stated ones.

WORK AREA SAFETY

Do not operate the engine efficiency tester in environments containing potentially explosive atmospheres or inflammable
materials, because sparks may be generated, which can ignite the dust or fumes.
Keep children and bystanders away from your workplace while operating the energy efficiency tester. Distractions from
other people can cause you to lose control over the engine efficiency tester during use.
While operating the engine efficiency tester, pay special attention to the moving parts of the engine.
Do not drop any metal tools on the motor vehicle battery: it may short-circuit.
Use the engine efficiency tester in a dry area, avoiding humidity.
ENERGY EFFICIENCY TESTER SAFETY
- Before use, check that the engine efficiency tester has not been damaged, and that there are no uncovered cables or worn
parts.
- Do not use the engine efficiency tester when damaged, to avoid the risk of electric shocks; do not try to open or modify it.
- Periodically check the engine efficiency tester, the power supply cable and the clamps.
- Do not cover the engine efficiency tester when using it. Allow adequate space for ventilation.
- Do not use the engine efficiency tester in humid or wet environments; do not expose it to rain. Wet and contaminated
environments increase the risk of electric shocks.
PERSONNEL SAFETY
- Stay alert; watch what you are doing. Do not use the engine efficiency tester while tired or under the influence of drugs,
alcohol, or medications.
- Always use the following personal protective equipment:
• safety shoes;
• eye protection;
• protective gloves against physical agents.
- Carry out all operations in well-aired, dry rooms.
- Check that the cables of the engine efficiency tester are kept away from fans, moving parts and the fuel pipe.
10
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
PNEUMATIC TOOL. FAILURE TO COMPLY WITH THE SAFETY STANDARDS AND
OPERATING INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.
EN I