Kenmore 911.47822 Instrucciones De Uso Y Cuidados página 16

OPERATION
Setting Special Features
Your control will allow you to lock the
touch pads so they cannot be activated
when pressed. If you're worried about
leaving the oven unsupervised, activate
this feature.
1. Press and hold, at the same time,
the BAKE and BROIL pads for
3 seconds, until the display
shows "SF."
2. (a) Press the CLEAN pad.
The display shows "LOC OFF"
(lockout off).
(b) Press the CLEAN pad again.
The display will show "LOC ON"
(lockout on),
3. Press the START pad.
To unlock the control, repeat steps 1
and 2. Press START pad when the
display shows "LOG OFF."
This feature can only be set when
the oven is not in use.
When this feature is on, the display
will show "LOC," if a touch pad is
pressed. (This feature will not affect
the Clock, Timer or Oven light pads.)
Your new control has a cook and
hold feature for timed cooking only
that will keep hot cooked foods warm
up to 3 hours after the timed cooking
is finished. To activate this feature:
,
,
Press and hold, at the same time,
the BAKE and BROIL pads for
3 seconds, until the display
shows "SF."
(a) Press the OVEN COOKING
TIME pad. The display will show
"HLd OFF."
(b) Press the OVEN COOKING
TIME pad again to activate the
feature. The display will show
"HLd ON."
3. Press the START pad.
This special feature will allow you to
change the speed; #1 means speed
of change is slow up to #5 which
means speed of change is fast. To set
the speed you prefer, follow these
steps:
1. Press and hold, at the same time,
the BAKE and BROIL pads for 3
seconds, until the display shows
"SF."
2. Press the UP arrow pad. The
display will show the current set
speed.
3. Press the UP arrow to increase the
speed up to the number 5.
or
Press the DOWN arrow pad to
decrease the speed down to the
number 1.
4. Press the START pad.
16