Care And Maintenance - Utilitech 00761 Manual De Instrucciones

FINAL INSTALLATION INSTRUCTIONS
8. Place the glass shade (F) into light kit pan (E), aligning
three flat areas on the top flange of the glass shade (F)
with the three raised dimples in the light kit pan (E). Turn
the glass shade (F) clockwise until it stops.
CARE AND MAINTENANCE
A
WARNING: Never immerse metal or electrical parts in water.
Bulb Replacement: Use two 60-watt max. type-A 15 medium-base bulbs or 13-watt max. medium-
base CFL bulbs.
Cleaning the Glass Shade and Light Kit Pan
Never use abrasive cloth, steel, wool pads or scouring powders on the glass shade or light kit pan.
1. Switch power off at the service panel and lock the service disconnecting means to prevent the
power from being switched on accidentally.
2. Remove the glass shade.
3. Clean the shade with a soft cloth and a mild detergent solution or glass cleaner.
4. Remove the bulbs from the light kit pan.
5. Gently vacuum the light kit pan and wipe clean with a soft cloth.
Cleaning the Fan Assembly
1. Switch the power off at the service panel and lock the service disconnecting means to prevent
power from being switched on accidentally.
2. Remove the light kit pan and unplug the fan assembly.
3. Gently vacuum the fan, motor and interior of the housing.
~
UTILITECH' ]
Lowes .com ~
- · - :
2 1