Selecting The Transmission Power - Monacor JTS MH-36G2/5 Manual De Instrucciones

6.4 Selecting the transmission power

There are two options for the transmission power:
high or low A high transmission power will in-
crease the range, but it will also reduce the bat-
tery life (the batteries will be discharged more
quickly)
1) The display indicates the current transmission
power:
= low transmission power
= high transmission power
Use the button
button to select

2) To save the setting, press the button SET
6.5 Key lock
Activating the key lock:
1) The display indicates
to select the setting

2) To save the setting, press the button SET
Deactivating the key lock:
1) Keep the button SET pressed for 3 seconds
until of the indication
2) Use the button

3) To save the setting, press the button SET
All rights reserved by MONACOR
reproduced in any form or by any means for any commercial use
to select

Use the button
starts flashing
to select the setting
INTERNATIONAL GmbH & Co KG No part of this instruction manual may be
®
7 Specifications
Microphone cartridge
System:
Polar pattern:
Carrier frequency range: 506 – 542 MHz
Audio frequency range: 50 – 16 000 Hz
Frequency stability:
Transmission power (EIRP)
Low:
or the
High:
Power supply:
Max operating time:
Dimensions:
Weight:
Subject to technical modification
dynamic
supercardioid
±0 005 %
10 mW
50 mW
2 × 1 5 V battery of
size AA
approx 25 h with
3400 mAh batteries
(alkaline)
∅ 50 mm × 260 mm
300 g
11