Maintenance; Storage - Oregon Professional Serie Manual De Instrucciones

Maintenance

CAUTION:
Do not use solvents or
spray cleaners on the battery contacts.
Damage to the connector could result.
Recommended cleaning of the battery
terminals is with an air gun
The air inlet and outlet grills need to be clean
for best operation An air gun may be used to
gently blow air into the outlet grill to clean
• Keep the charger clean. Never immerse
in water.
• Keep oil, water and sharp edges away
from the charger and its cords. Insure the
charger cords do not get pinched by tools,
heavy items or doors. Damage to the cord
and exposure of live electric conductors could
result
• Do not operate the charger with a
damaged cord or plug. If either the input or
output power cord or the DC plug is damaged,
the damaged component must be replaced
• Do not remove the ground pin from the
AC plug. Always connect to a properly
grounded outlet.
• Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging from the
charger
• Do not use this battery charger for any
use other than as intended.
• There are no user serviceable parts inside
the charger. Do not disassemble
• Do not attempt to modify this product—
it could result in serious injury.
• If the power cord becomes damaged,
replace only with genuine Oregon
replacement cord.

Storage

• Remove the battery pack from the
charger before storing or transporting.
Charger Model 120V - C1600
IMPORTANT SAFETY INSTRUCTIONS
7 7