ANSMANN ALCT 6-24/1 Instrucciones De Manejo página 3

cOMMissiOning
Connect the battery with the battery clips of the charger. Pay attention to the correct polarity.
The red clip with (+), the the black clip with (-). Plug the charger into a convenient mains
socket. After connecting the charger will start the charging procure automatically. The green
LED shows reday for use, the red LED indicates charging. After charging the red charging LED
switches off and the battery is provided with trickle charging. The battery is now fully charged
and ready for use.
warning
When charging lead acid cells, explosive gases can develop. Avoid open fire and sparks.
speciFicatiOn:
Input: 230V 50Hz
Voltage of the battery end of charging voltage
6 Volt
12 Volt
24 Volt
ALCT6-24/1
6,9 V 1000 mA
13,8 V 1000 mA
27,6 V 700 mA
max. charging current
ALCT 6-24/2
1500 mA
2000 mA
1000 mA