Automatic Punching - Renz DTP 340 A Instrucciones De Servicio

5. Automatic Punching

Press the automatic on button.
Jog the material to be punched evenly and put it
into the center in the punching slot. Check that
the paper is level in the punching slot, re-align if
necessary.
Max. punching capacity with 80 g / sqm. ( 20#
stock ) paper approx. 25 - 30 sheets, depending
on the punching die.
Slide the paper to the left, against the stop, and
release it.
The punching operation is triggered automatically
and then......
...... the paper is automatically ejected into the
paper tray.
Adjust the right hand and rear paper stops of
the outfeed tray so that the paper falls into the
tray.
7