OPERATING FEATURES
The camera may be operated only using the UTC controls available on the DVR/HDVR of the Urmet
catalogue implementing the function or by using the remote control Urmet code 1092/310. Refer to the
complete product documentation on the Urmet website to check for the list of available devices.
These controls can be used to select the 1080P/720P/CVBS video outputs or to access the OSD menu.
Using the remote control Urmet code 1092/310 or a compatible DVR/HDVR, it is possible to switch the
video output of the 1080P/720P/CVBS standard cameras or access the OSD menu.
Refer to the respective product manuals for using the controls.
MENU USE
The camera ref. 1092/250H uses a multi-level menu that allows to enable/disable or change camera
settings.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed, the access first screen will be displayed.
Once the item has been selected, the parameter can be changed choosing among the available options.
By selecting the item associated to the symbols
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item EXIT
and press the central button.
To reactivate the default values select the item EXIT
MAIN MENU
SETUP (DEFAULT VALUES)
LENS
EXPOSURE
BACKLIGHT
WHITE BAL.
DAY&NIGHT
NR
SPECIAL
ADJUST
EXIT
Note
With default values, the camera uses a brightness adjustment that is not suitable for all installations.
Change BRIGHTNESS in the menu EXPOSURE (see below), if necessary.
DS1092-524
or
RESET and press the central button.
MANUAL
OFF
ATW
EXT
SAVE&END
it is possible to access to the next submenu,
SAVE&END
17