Victor 2640-2 Manual De Instrucciones página 11

26. [÷]
27. [X]
28. [M]
29. [M◊]
30. [M−]
31. [M+]
Division Key
The division key performs division and intermediate sequential
operations. When the Constant Calculation (K) slider switch is ON, this
key performs automatic constant division. It establishes the next
amount as a constant divisor. The [÷] key also causes the calculator
to divide when you depress the [+=], [−=], [%±], [M+], [M−], [x], or [÷]
key. Each divisor entry is retained as a constant (except [M+] and
[M−] entries) until you depress the [x], [÷] or [CE] key.
Multiplication Key
The Multiplication key performs multiplication, and intermediate
sequential operations. When the Constant Calculation (K) slider switch
is ON, this key performs automatic constant multiplication. It
establishes the amount entered or the previous printed or printed /
displayed amount as a constant multiplicand. The [x] key also causes
the calculator to multiply when you depress the [+=], [−=], [M+], [M−],
[X], or [÷] key. Each multiplicand entry is retained as a constant
(except [M+] and [M−] entries) until you depress the [x], [÷], or [CE]
key.
Memory Total Key
Prints and clears the memory.
Memory Subtotal Key
Prints but does not clear the memory.
Memory Minus Key
Subtracts an amount from memory. If there is a live calculation
pending, the Memory Minus key will complete the calculation and
subtract the amount from Memory.
Memory Plus Key
Adds an amount to memory. If there is a live calculation pending, the
Memory plus key will complete the calculation and accumulate the
result to Memory.
- 11 -