Operations And General Maintenance - Victor 2640-2 Manual De Instrucciones

BEFORE TURNING ON -
ribbon and check the rating label on the bottom to see if the rated voltage corresponds to
the local voltage before plugging in the AC cord.
Note:
Ribbon cushion is located under printer cover.
ACTIVATE BACKUP BATTERY
Before you start using the calculator, please remove the insulation paper below the backup
battery.
1. Turn the AC power switch OFF and remove the battery compartment
cover located on the bottom case.
2. Remove the insulation paper located below the backup battery.
3. PRESS THE RESET SWITCH.
4. Replace the battery compartment cover.
5. Turn ON the AC power switch.
6. Program the date and time according to the instruction manual.
GENERAL MAINTENANCE
1. Do not place the machine in hot, dusty or damp locations.
2. To clean the housing use a silicon-treated cloth. Do not use water or detergents.
3. Do not place anything on the housing, particularly on the head of the printer
mechanism.
4. Turn off the power switch before removing the plug from the AC wall outlet.
5. Turn the power switch off while not in use.
6. The socket-outlet shall be installed near the equipment and shall be easily
accessible.
7. This equipment is not suitable for use in location where children are likely to be
present.
8. Printer cover must always be closed before using / operating the calculator.
9. Do not touch printer moving parts and sharp edges between the printer
mechanism as it may cause injury or pain.
10. Do not touch paper cutter sharp edges as it may cause injury or pain.
Please remove the ribbon-cushion placed on the
Backup Battery
CR2025
1
REMOVE BEFORE USING THE MACHINE
Depress Reset in Battery Compartment
Program Date & Time – See Operator Manual
- 3 -
Reset Button
3
Insulation
2
Paper