Medisana TM 750 Instrucciones De Manejo página 33

•
Some people will have different readings for the right and left ears.
Always measure the same person in the same ear when measuring
temperature changes.
•
The measurements can also be influenced by your sleeping position.
If someone has slept on a particular ear for a considerable period,
the temperature will be higher than normal in this ear. In this case,
measure in the other ear or wait for a few minutes before measuring.
3.3 Measuring the temperature at your forehead
NOTE
Forehead temperatures should only be taken for
checking purposes, since the skin temperature at the
forehead is easily affected by outside influences,
meaning that the measurement can be falsified.
1. Switch on the thermometer by shortly pressing the button for fore-
head measurement mode
emits two short beeps.
2. In order to measure the body temperature on the forehead correctly,
the sensor cover
3. Place the measuring head with the sensor (and
the put on sensor cover) on a temple and press
the button for forehead measurement mode
The symbol for forehead measurement mode
p
appears in the display. Slowly move the
thermometer smoothly over the forehead (button
still pressed down) to the other temple. Release the
button for forehead measurement mode
4. After the temperature has been determined, the device emits a
signal tone. The result will be shown in the display
3
. The device performs a self-test and
1
needs to be put on the sensor.
3 Operation
3
.
3
.
6
.
GB
g
g
h
25