Warranty; Description Of The Machine - Berkel BM +42F Serie Manual De Uso Y Manutención

1.3 - Warranty

For no reasons the user is authorized to tamper the machine. In case of any ir-
regularity, he must call the manufacturer.
Any user or non authorized personnel that attempts to disassemble, modify or
tamper any element of the machine will lead to the invalidity of the Conformity
Statement which complies with EEC Directives 89/392, and the warranty will be
voided, in this case the manufacturer is not liable for eventual damages caused to
people or things due to this tampering.
Furthermore, the manufacturer is not liable in the following cases:
-
an incorrect installation;
-
improper use of the machine by unskilled personnel;
-
use of the machine not in accordance with the regulations of the country where it
has been installed;
-
insufficient or wrong maintenance;
- use of non original or specific spare parts;
-
not following fully or partially instructions given.

1.4 - Description of the machine

This mincer is a simple, compact and highly performing machine.
-
As it has to be used to mince foodstuff, the parts in contact with the product have
been chosen to ensure the highest degree of hygiene. The structure is made of
stainless steel.
-
The hopper is made of polished stainless steel to ensure the highest degree of
hygiene and to facilitate the cleaning.
-
The tools are made of stainless steel to ensure high resistance and hygiene.
-
The machine has a modern design, it is solid and made of aluminium with the
structure made of stainless steel.
-
The feed openings are stainless steel casting with the possibility to apply the
total or partial UNGER system.
-
The machine is equipped with a reverse rotation sense of the screw propeller by
means of a selector .
-
The feed opening lock is rigid to give a better cut and to increase the life of the
plates and knives.
-
The three-phases and single-phase motors are ventilated with the following
advantages:
- maximum efficiency and life of the motor;
- increase of the working effectiveness due to less interruptions;
- low heating level to keep meat fresh and unchanged.
The models illustrated in this manual have been manufactured in compliance with
EEC Directives 89/392 and following amendments. In case of accidents, the
manufacturer is not liable if the machine has been modified, tampered, if the safety
protections have been removed or if the machine has been used improperly.
6