Protections And Safety Devices; Working Position - Berkel BM +42F Serie Manual De Uso Y Manutención

1.8 - Protections and safety devices

!
WARNINGS
Before using the machine, make sure all the safety devices are installed and function cor-
rectly. At the beginning of each shift check the presence and position of the safety devices. If
they are not correctly installed or if they are missing, call the maintenance operator
Fig. 1.8.1
5
1
3.Stainless steel hopper solidly fixed to the feeding opening
4. Protective device for electric elements.
The lower part of the machine is closed by a protection which prohibits anything
entering to the electrical elements placed inside.
5.Micro on the hopper
In the lower part of the hopper, there is a magneto at the level of the safety
sensor.
WARNINGS!
Do never tamper the safety devices.

1.9 - Working position

The correct operator's position to grant an excellent work is indicated in fig. 1.9.1.
3
1.Meat exit, plate holes of less than 8 mm.
In this case the fingers cannot enter the holes.
On request, it is possible to install plates with
outlet holes larger than 8 mm.
2
2. Hand protection.
4
In this case the user must provide a protection
for this opening.
The hopper is equipped with a hand protection
"2" Fig.1.8.1 p. 13 , complying with the Ministry
of Labour and Social Security n° 66 of the
05.09.79.
9
.
Fig. 1.9.1