Extension nozzle
♦
Slide the extension nozzle
marking line on the extension nozzle
appliance must be aligned with each other (see fig. A on the fold-out page).
♦
Turn anticlockwise until both marking lines on the extension nozzle
aligned with both marking lines on the appliance. The extension nozzle
remains locked in this position (see fold-out page Figure B).
NOTE
►
The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
extension nozzle
■
The extension nozzle
Assembling the squeegee
♦
Remove the upholstery nozzle
brackets onto the squeegee attachment
♦
Then press the upholstery nozzle
attachment
Upholstery nozzle
♦
Slide the upholstery nozzle
The marking line on the upholstery nozzle
appliance must be aligned with each other (see fold-out page Fig. A).
♦
Turn anticlockwise until both marking lines on the upholstery nozzle
aligned with both marking lines on the appliance. The upholstery nozzle
remains locked in this position (see fold-out page Figure B).
■
A fabric cover
be used for the cleaning of sensitive surfaces, such as sofas and armchairs.
NOTE
►
The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
upholstery nozzle
■
The upholstery nozzle
SDR 1100 B2
10
onto the steam nozzle
10
.
10
is removed in the reverse order.
14
14
13
(see fold-out page).
14
onto the steam nozzle
15
is supplied for use with the upholstery nozzle
14
.
14
is removed in the reverse order.
6
10
and the two marking lines on the
and place this together with the two
13
.
under the mount of the squeegee
6
up to the stop.
14
and the marking lines on the
GB │ MT
up to the stop. The
10
are
10
14
are
14
14
. This can
│
49
■