Storage; Troubleshooting - Silvercrest SDR 1100 B2 Instrucciones De Uso

■ If it is dirty, the removable fabric cover
with the symbols on the label:

Storage

♦ Store the cleaned and dried appliance in a clean and dust-free location.

Troubleshooting

PROBLEM
The appliance is
not working.
No steam is
produced.
The green control
lamp
and then goes out
again.
The steam volume is
low.
Water drips from the
steam nozzle
SDR 1100 B2
The fabric cover
Do not bleach the fabric cover
Do not dry the fabric cover
Do not iron the fabric cover
POSSIBLE
CAUSE
The plug is not con-
nected.
The appliance is
damaged.
The water tank
empty.
The appliance is not yet
heated up.
This is not a fault: the
temperature dropped
5
lights up
for a short time and the
appliance started heat-
ing up again.
The temperature is too
low.
The temperature is too
6 low.
.
15
can be cleaned in accordance
15
is machine washable at 60°C.
15
.
15
in a tumble dryer.
15
.
Connect the appliance to
a mains power socket.
Contact the Customer
Service department.
3
is Fill the water tank
water.
Wait until the green control
lamp
Wait until the appliance
has heated up again.
Wait until the appliance
has heated up again.
POSSIBLE
SOLUTIONS
3
with
5
lights up.
-
GB │ MT │ 51 ■