Using The Cooler In Dc Mode - Dometic CoolFun SC26 Instrucciones De Uso

CoolFun SC26, SCT26, SC30, SC38
6.2 Mounting the wheels (only SC38)
➤ Mount the wheels as shown to the cooling device (fig. 3, page 4).
6.3

Using the cooler in DC mode

I
NOTE
If you connect the cooler to the cigarette lighter of your vehicle,
remember that the ignition must be turned on to supply it with power.
➤ Place the device on a firm base.
➤ Connect the DC connection cable to the cigarette lighter or the DC socket in the
vehicle.
✓ The device starts cooling/heating the interior.
➤ To switch off the cooling device, disconnect the DC connection cable.
6.4 Using the cooler in AC mode (only SC30, SC38)
➤ Place the device on a firm base.
➤ Connect the AC cable to the AC mains supply.
➤ Turn the cooling capacity control (fig. 2 6, page 3) to the desired position.
➤ Push the cold/hot switch (fig. 2 5, page 3) to the position "Cold" (cooling) or
"Hot" (heating) to switch the device on.
✓ The device starts cooling/heating the interior.
EN
Operation
13