Lockncharge iQ 20 Cart Manual De Instrucciones página 6

iQ 20 Cart
STEP 4 - Syncing and Charging your devices
To charge your devices, unwind the power cable
and plug it into the wall socket. Then plug the
power cable into Cart. Charging will automatically
start (may need to switch the wall outlet "on").
To sync your devices, connect your Macbook or
PC to the iQ 20 Cart with the provided USB-A to
USB-B cables.
LED Status: Refer to the included iQ 5 Sync Charge Box instructions
The LED's on top of the iQ 20 Cart frame indicate the current status of each port and device.
NOTE: The LED indicators for the charge-sync sequence are printed on the top of the sliding tray (see below).
Solid red: Ready to charge.
Flashing red: Identifying device.
Follow the additional instructions for the iQ 5 Sync Charge Box supplied,
Flashing green: Charging device.
Solid greed: Device ready to use.
for operation of the syncing and charging functions.
When not in use, wrap excess power cable around
the cable cleat of the Cart.
PLEASE NOTE:
The USB-B end connects to the iQ Cart. The USB-A
end connects to your Macbook or PC.
Follow the instructions from Apple configurator,
iTunes or other software to sync your devices.
Devices will continue to charge during syncing.
Flashing yellow: Host available.
Device not connected.
Solid yellow: Device connected.
Ready to sync.