Human Touch Perfect Chair Laptop Desk Manual De Uso Y Cuidado página 5

Install the mounting post
1. Hold the spacer plate with the pin facing down, align the pin with the corresponding hole on the mounting
plate, then insert the pin into the hole to secure the plate (Fig.7).
(Fig.7)
2. Hold the mounting post with the threads facing down,
align the pin on the bottom of the post with the outside
hole on the top of the spacer plate (Fig.8).
Outside hole
of spacer plate
3. Install the nut (provided) onto the bottom of the post and use
the provided open wrench to tighten. Do not over-tighten (Fig.9).
humantouch.com
Spacer plate
Mounting post
Pin
Spacer plate
(Fig.8)
Nut
(Fig.9)
6
Install the desk
1. Install the desired number of spacers onto the post, to position the desk at the desired height.
2. Place the Laptop Desk collar onto the post.
3. Place any unused spacers on top of the post for storage.
4. Place the post cap on top of the post.
Cap
Collar
(Fig.10)
(Fig.11)
Complete desk installation
7
Place unused spacers on top for storage
Add spacer to increase the
height (maximum height with
5 spacers)