Teac PD-H01 Manual Del Usuario página 25

3 Press the ENTER button.
The program number appears on the display .
Display example
Repeat steps and
2
the desired tracks .
o If you press a number button that determines a track
number, it will be set immediately even if you do not
press the ENTER button .
For example, when there are 20 tracks in total, if you
press the 3 button, track number 3 will be added to
the program immediately . Likewise, if you press the
1 button followed by the 5 button, track number 15
will be added to the program immediately .
In these cases, pressing the ENTER button when it is
not necessary will have no effect .
o A maximum of 30 tracks can be programmed .
o When adding tracks to a program when stopped, if
you try to add more than 30 tracks to the program,
"P-30" remains on the display .
o When adding tracks to a program during playback,
if you try to add more than 30 tracks to the program,
the playback time remains on the display .
o Press the CLEAR button to remove the last track
added to the program .
o You cannot add a track that does not exist on the disc
to a program .
4
Press the Play/Pause button (7/9) to start pro-
gram playback.
Playback stops after all tracks have finished playing .
PD-H01_OM_EFS_vA_CS6.indb 25
until you have programmed all
3
EN
25
13/01/25 17:06