Assembly - Craftsman 151.98836 Manual Del Usuario

UNPACKING
This product requires assembly.
■ Carefully remove the product and all
accessories from the box. Make sure that all
items listed in the packing list are included.
Do not use this product
WARNING!
if any parts on the Packing List are already
assembled to your product when you unpack
it. Parts on this list are not assembled to the
product by the manufacturer and require
customer installation. Use of a product that
may have been improperly assembled could
result in serious personal injury.
■ Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
■ Do not discard the packing material until
you have carefully inspected and satisfactorily
operated the product.
■ If any parts are damaged or missing, do not
operate the product. Return it for replacement
to the retailer from which it was purchased.
PACKING LIST
60V Cordless Blower
Blower Tube
Concentrator Nozzle
(1) 60V Max* 2.0 Ah Lithium-Ion Battery
(1) 60V Max* Battery Charger
Operator's Manual

ASSEMBLY

BATTERY
IMPORTANT! The battery pack is not
charged when it is purchased. Before using
the blower read all safety precautions, and
follow the instructions in the Battery Pack
And Charger section. With regular use, it will
need shorter charging time. If storing for a
prolonged period of time, remove the battery.
When ready to use again, charge the battery
pack for at least 70min again.
TO INSTALL
See Figure 2, page ii
■ Align the groove on each side of the battery
pack with the edges of the terminal plate on
the top of the blower body.
■ Grasp the blower firmly.
■ Slide the battery pack onto the terminal
plate until it secures into place.
■ Do not use force when inserting the battery
pack. It should slide into position and "click".
10 ― English