Operating Elements And Connections; Safety Notes - IMG STAGELINE PARL-40SET Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
All operating elements and connections de -
scribed can be found on page 2.
1
Operating Elements
and Connections
1 Mains jack for connection to a socket (230 V~ /
50 Hz) via the supplied mains cable
2 Button MODE to change the spotlight assign-
ment to the DMX channels
3 Display
4 Buttons UP and DOWN to adjust the DMX start
address
5 DMX signal output (3-pole XLR) for connection
to the DMX input of another DMX light effect
unit;
pin 1 = ground, 2 = DMX-, 3 = DMX+
6 DMX signal input (3-pole XLR) for connection of
a light controller;
pin 1 = ground, 2 = DMX-, 3 = DMX+
7 Connection cable between the control unit and
the spotlight
8 Stand sleeve for mounting onto a lighting stand
9 Setscrew against accidental displacement of
the spotlight
10 Setscrews; in case the spotlights do not keep
their inclination as adjusted, retighten these
screws
11 LED spotlight
2

Safety Notes

The unit corresponds to all required directives of
the EU and is therefore marked with
WARNING The unit uses hazardous mains volt-
age. Leave servicing to skilled per-
sonnel only; inexpert handling may
result in electric shock.
Please observe the following items in any case:
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity, and heat (admissible ambient tempera-
ture range 0 – 40 °C).
G
Do not place any vessels filled with liquid, e. g.
drinking glasses, on the unit.
G
Do not operate the unit or immediately discon-
nect the mains plug from the mains socket
1. if the unit or the mains cable is visibly dam-
aged,
2. if a defect might have occurred after the unit
was dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the unit must be repaired by skilled
personnel.
G
Never pull the mains cable for disconnecting the
mains plug from the mains socket, always seize
the plug.
G
For cleaning only use a dry, soft cloth, never use
chemicals or water.
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is not
safely mounted or not correctly operated, or if it is
not repaired in an expert way.
3
Applications
The PARL-40SET consists of 4 flat LED spotlights
and the corresponding control unit. It serves as an
illumination, e. g. on stage, in discotheques, and
festival rooms. As a light source, 146 extra bright
10 mm LEDs are used in each spotlight. These
LEDs have a low power consumption, a low heat
.
development and a long life. The LEDs allow to
radiate coloured light in the three primary colours
(red, green and blue) and light which can be mixed
from the primary colours by addition.
The set is designed for control via a DMX light
controller (16 DMX control channels). DMX is short
for Digital Multiplex and allows the digital control of
several DMX units via a common control line.
The LED-4MC from "img Stage Line" is suitable
as a basic, easy-to-handle controller. Thus, also
colour transitions and (music-controlled) running
light patterns and stroboscope effects are possible.
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.
GB
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

38.4790

Tabla de contenido