First Use; Checking The Laminator And Product Contents; Setting Up The Laminator; Activating / Deactivating The Laminator - EASYHOME OL 250-L Manual Del Usuario

First use

First use

Checking the laminator and product contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointy object, you may quickly damage the
laminator.
− Be very careful when opening the packaging.
1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If
this is the case, do not use the laminator. Contact the manufacturer at the
service address specified on the warranty card.
3. Check to make sure that the delivery is complete (see fig. A).

Setting up the laminator

1. Position the laminator so that there is enough space to insert a laminating
pouch 5 . Do not position the laminator directly in front of a wall or other
objects.
2. Connect the power plug to a properly installed socket with a protective
conductor (120 V = house connection).

Activating / deactivating the laminator

1. Move the ON / OFF switch
The ready indicator
laminator has reached the correct temperature for lamination.
The preheating time may vary depending on the ambient
tempera ture and air humidity.
2. Move the ON / OFF switch to "OFF" ( ) to switch the laminator off.
12
3 to "ON" (―) to switch the laminator on.
1 will turn from dark blue to red once the