Safety; Correct Use; General Safety Instructions - BRÖTJE RGT B Instrucciones De Montaje

Safety

GB
2. Safety

2.1 Correct use

2.2 General safety instructions

26
Danger! Observe the following safety information! Otherwise you are endangering
yourself and others.
The RGT/RGTF room controllers are designed as remote control units and for pro-
gramming all floorstanding Brötje boilers with integrated RVS series system con-
trollers as well as boilers with integrated LMS series system controllers.
In addition, the RGT room controller can be used to operate and program boilers of
type WGB and SGB with integrated LMU 7 or LMS series system controllers.
The RGTK and RGTKF room controllers are designed as remote control units and for
programming Brötje heat pumps.
For detailed information on programming the integrated system controller and
setting tables with the programmable parameters, see the programming and hy-
draulics manual as well as the heat source installation manual.
Danger of electric shock! All electrical work in connection with the installation
must only be carried out by a trained electrician!
Caution! A danger of significant damages to property exists during installation of
accessory. Therefore, accessories must only be installed by specialist companies
and commissioned by specialists of the installing company!
Used accessories must comply with the technical rules and have been approved in
connection with these accessories by the manufacturer.
Only original spare parts must be used.
Unauthorised conversions and modifications of accessories are not permitted, as
this can endanger persons and lead to damage of the accessories. In case of not
observing this, the approval of the accessories becomes void.
Room device RGT B/RGTK B and RGTF B/RGTKF B 136231-02 10.15