Dometic MCA1215 Instrucciones De Montaje Y De Uso página 27

MCA1215 – MCA2440
When you have connected the remote control MCA-RC1 (accessory)
➤ Activate or deactivate sleep mode (noise reduced mode) using the "Sleep
Mode" button (fig. 0 2, page 7).
The fan is not regulated in sleep mode.
✓ The LED (fig. 0 1, page 7) on the MCA-RC1 indicates the operating status (see
following table).
Mode
Sleep mode activated Orange, constantly lit Phase 1 to 5
Sleep mode
deactivated
Fault
I
NOTE
In the event of a fault (the Status LED is red), refer to chapter "Trouble-
shooting" on page 29).
EN
Display
Green, slowly
flashing
Green, constantly lit
Red, constantly lit
Red, quickly flashing
Red, slowly flashing
Red, double flash
Red, slow double
flash
Meaning
Phase 1 to 4
Phase 5
Short circuit or defective fuse
Battery or battery charger is overheating
Battery undervoltage or overload
Fan fault
Fault at the starter battery connection
Using the device
27