Mi-T-M Corporation cm series Manual De Operation página 21

CleANINg hORIzONTAl SuRfACeS
Move nozzle wand from side to side. Direct spray at an
angle to force debris ahead and away from the cleared
area.
Depending on the material to be removed and nozzle
pressure, hold nozzle end 8 to 10 inches (20 to 25 cm) from
the surface and use slow, overlapping strokes. If debris
is easy to remove, move nozzle back to cover more area
for faster cleaning.
CleANINg veRTICAl SuRfACeS
ImPORTANT: Remember that the washer can deliver
a high pressure spray that can break
glass and gouge soft wood and other
materials.
When cleaning building interiors or exteriors without
detergents, work from top to bottom. This will help
eliminate streaks. In interiors, start with the ceiling first,
then the walls and the floor last.
Clean around windows carefully. If glass panes are not
well-caulked and puttied, the high pressure spray could
break the glass.
Never spray directly overhead. Always spray ahead to
avoid dripping or falling debris.
Operator's Manual
Operating the Washer
8" - 10"
(20-25 cm)
21