Advanced Functions - DELTA DORE TYDOM 2.0 Manual De Utilización

9. Advanced functions

Switch the alarm control unit to MAINTENANCE mode (see system guide).
Open the TYDOM 2.0 unit.
To change from DHCP to a fixed IP
- Press and hold the T3 button for at least 3 seconds until the T1 LED starts flashing slowly.
- Release the button within 15 seconds
To delete the password of the TYDOM application
- Press and hold the T3 button for at least 15 seconds until the T1 LED starts flashing rapidly.
- Release the button within 30 seconds
To RESET TYDOM 2.0
(Use of DHCP, deleting the password, deleting associations, deleting current defects, restor-
ing factory settings)
- Press and hold the T3 button for at least 30 seconds, TYDOM emits a long beep.
- Release the button
T1
47
T3
EN