Engel RS 4800 S Manual De Usuario página 102

When the focus on the satellite list, you can press OK key to setting which satellite will be select with
LNB
You can press RED key to set SAT/tp Manager
Press Green key to start channel search
Press blue key to update transponder from network
1
Satellite: In this item, press [Volume Up/ Volume Down] key can switch Satellites and press [OK]
key can enter satellite list for you to select directly.
2
LNB Freq: In this item, press [Volume Up/ Volume Down] key can select the parameter. Option is
5150/5750/5950/9750/10600/10700/10750/11300/5150-5750/Universal(9750-10600)
/Universal(9750-107500)/and MDU
3
DiSEqC1.0/1.1: You can use [Volume Up/ Volume Down] key to switch options. There are several
options for your selection: Disable / LNB1 / LNB2 / LNB3 / LNB4
4
22K: You can use [Volume Up/ Volume Down] key to switch "ON / Off". When this item is
switched to "ON", receiver will receive TV and radio input signal from 22K port. If the item is
switched to "Off", the receiver will receive all signal from 0K port.
! Notice
When you choose LNB type "Universal", you can not modify 22K.
5
Polarity: In "Polarity" item, [Volume Up/ Volume Down] key to switch "Auto/ H / V" functions.
6
Motor：You can use [Volume Up/ Volume Down] key to set Antenna type by Motor
7
Unicable：You can use [Volume Up/ Volume Down] key to set unicable enable or none
Motor Antenna
1
Motor Type: DiSEqC1.2/USALS
2
Motor Setting:
If you select "DiSEqC1.2", "Local Longitude / Local Latitude" is not available. It will show the screen
like below:
When the highlight on the mode item，You can use
[Volume Up/ Volume Down] key to set Motor function
Automatic SAT Scan
you can find sub-menus for Satellite,
Transponder, Polarity, NIT, program ,Scan mode，scan
select，Signal Quality Bar and etc. and press GREEN
key to start channel search
1、 Satellite: Select the satellite what you want
to search the channel
2、 Transponder : Select the desired TP
(transponder).
3、 NIT：scan by nit search mode
4、 Program：scan by all/free only
5、 Scan mode：default、one Tp、blind scan
15