Front Panel; Rear Panel - Engel RS 4800 S Manual De Usuario

Front Panel

1. DC Input: 12V/1.5A input Range
2. Wifi antenna：built-in wifi model
3. RS 232 SERIAL PORT: To transfer the data to another STB or PC by RS-232 cable
4. IR Port：Connect the IR cable

Rear Panel

Please refer to the diagram above for all possible connections of your receiver
Do not connect the unit to the mains socket until all other connections have been made and checked.
Your configuration may vary depending on model.
1. RF IN (LNB IN 13/18V 500mA MAX) : Connect the coaxial cable from LNB of your Dish.
2. HDMI: Audio and Video output socket for TV set with HDMI Input Jack only.
3. Ethernet Port : Plug-in Ethernet Board (RJ45 port)
4. USB Connector: USB 2.0 Host, connect to USB hard disk or flash disk
5. CA slot: CA interface support
6. AV:CVBS output
7.
5