Understanding The "Recording" Sub-Menu; Self-Monitoring Functions Overview; Errors During Data Input; Code Error - omisa HST 300 Smart Manual De Instrucciones

O . M . I . S . A . S r l
Via Verga 9/11
20845 Sovico (MB), Italy

10.2 Understanding the "Recording" Sub-menu

"Welder Code on" means that the welder identification
code has to be entered as set with "Welder Code Op-
tions," "off," that this is impossible.
"Commission Number on" means that the commission
number (job number) will have to be entered or con-
firmed before every new welding, "off" that the user
is not prompted to enter it.
"Additional Data on" means that the additional data will
have to be entered or confirmed before every new
welding, "off" that the user is not prompted to enter
them.
"Fitting Code on" means that the second, so-called trace-
ability code of the electrofusion fitting has to be
entered before every welding, "off," that this is not
possible.
"Pipe Codes on" means that the codes of both pipes/
components (ISO-compliant welding and treaceability
codes) have to be entered before every welding, "off,"
that this is not possible.
"Pipe Length on" means that the length of both pipes/
components has to be entered before every welding,
"off," that this is not possible.
"Weather Conditions on" means that the weather has to
be selected in a list before every welding, "off," that
this is not possible.
"Installing Company on" means that the company that
performs the installation work has to be entered before
every welding, "off," that this is not possible.
"Print Tags – M – " means that by pressing the MENU key,
the user can access a sub-menu for starting to print (a)
label(s) with reference to a given welding operation,
with the optional label tag printer.
All data can also be read from a bar code with the
scanner, provided such a bar code is available.
Info
11

Self-Monitoring Functions Overview

11.1 Errors During Data Input

11.1.1 Code Error

An erroneous input has occurred, a code tag is poor or has
an error in code symbology or code reading was improper.
Version February 2020 HST 300 Smart User's Manual
Welder Code on
>Commission No. on
Display 16
EN
19