Processing Table; Cleaning And Maintenance - Imetec CH 1000 Instrucciones De Uso

Always disconnect the appliance from the mains supply before
cleaning or performing maintenance.
EN
• Proceed as follows after having assembled the appliance:
• Insert the plug (2) in the socket.
• Press the motor casing (1) to activate the appliance [Fig. E].
• Once the food has been processed wait for the blades (6) or whisk (7) to stop completely.
• Disconnect the plug (2) from the socket.
• Lift the motor casing (1).
• remove the cover (3).
• remove the blades (6) or the whisk (7).
• Empty the container.
How to use the accessories in the Imetec CH 1000 chopper:
Insert the meat in the con-
Minced tainer with the blades, close
the cover and actuate the
meat
appliance (Fig. E).
Sauce
Whipped
cream
Mayonnaise
• Clean the appliance after having used it.
• Always pull the plug out of the electric power socket before cleaning or maintenance.
• Thoroughly wash the removable parts: the cover (3), the container (5), the blades (6) and the whisk
(7) by hand with hot water and washing-up liquid or in the dishwasher at a maximum temperature of
55°C.
• Dry well.
14

PROCESSING TABLE

Blades (6) and liquid
Blades (6)
dispensing nozzle (4)
Place the ingredients in
the container with the
blades, close the cover,
– actuate the appliance (Fig.
E) and slowly pour the oil
in the liquid dispensing
nozzle while processing.
–
–

CLEANING AND MAINTENANCE

Whisk (7)
–
Insert the cream in the
container with the whisk,
–
close the cover and actuate
the appliance (Fig. E).
–
Whisk (7) and liquid
dispensing nozzle (4)
–
–
Place the whole egg in the
container with the whisk,
close the cover, actuate
– the appliance (Fig. E) and
pour the oil in the liquid
dispensing nozzle while
processing.
–
–
–