Technical Data - Festool CTL 48 E LE EC Manual De Instrucciones

CTM 48 E LE EC, CTL 48 E LE EC
GB
When extracting large quantities of oak or beech wood dust or dust that exceeds
the permitted limit values, only extract from a single machine (electric or air
tool).
– Risk of explosion and fire hazard: do not extract sparks or hot dust, flammable or ex-
plosive dust (e.g. magnesium, aluminium, petrol, thinner, with the exception of wood),
aggressive fluids/solids (e.g. acid, leach, solvent).
– Observe all national safety regulations as well as the material manufacturer's speci-
fications!
– Do not damage the mains power cable (e.g. by driving over, dragging, etc.). Protect
from heat, oil and sharp edges. Do not pull the plug from the socket by the cable.
– Check the plug and the cable regularly and have them replaced by an authorised ser-
vice workshop should either become damaged. Always replace the mains power cable
with the type specified in the spare parts list.
– Do not expose the machine to rain.
– For reasons of safety, never operate the machine from an unearthed socket.
– Always use the machine socket for the purpose specified in the manual.
– Always use original Festool accessories.
– Pull the plug from the socket when the machine is not in use and prior to maintenance
and cleaning work.
– Do not lift or transport using a crane hook or lifting gear!
– Do not insert and remove the plug under load.
– In an emergency (e.g. short circuit or other electrical faults occur), switch off the ma-
chine and pull out the mains plug.
3

Technical data

Mobile dust extractors
Power consumption
Maximum appliance socket connected load
Max. suction capacity (air), turbine
Max. vacuum, turbine
Filter surface area
Suction hose
Length of the net cable
Sound pressure level as per EN 60704-2-1 / Uncertainty K
Protection category
Container capacity
Dimensions L x W x H
Weight
14
150 - 1100 W
EU
CH
204 m³/h (3400 l/min)
D 27 mm x 3.5 m-AS
72 dB(A) / 3 dB
630 x 406 x 640 mm
2500 W
1200 W
23000 Pa
6318 cm²
7.5 m
IP54
48 l
17.9 kg