Balluff BFF T-001-A2A-S4 Serie Manual De Instrucciones página 11

Screw-in flow controller with LEDs
BFF T_ _ _ _-_ _001-_ _ _A2A-S4
Installation and disassembly
Dimensional drawings
BFF T7031-H...
Fig. 5: Dimensions in millimeters
Installation instructions
Protect device supply with a 1 A fast-acting fuse per
IEC 60127.
Note maximum permissible switching current at 50 °C and
higher: 100 mA/10 K.
Do not install sensor and cables in the vicinity of strong
magnetic fields or cables carrying high currents.
To improve noise immunity with long cable runs use
shielded cables.
www.balluff.com
BFF T7048-H...
Seals
Fig. 6: Seal dimensions
Do not exceed 30 bar for flat gaskets made of AFM 34.
Before startup check seal for medium compatibility and
pressure resistance.
For oriented installation of the flow controller vary the
thickness of the gasket or liquid sealing material.
BFF T7040-J...
english 3