Frame Assembly - topmark JADEN T2081 Instrucciones De Uso

A. Frame assembly
Remove frame from packaging.
1.
Press both buttons on the rear tube
2.
and slide them down to open the rear
tube.
3. Put front and rear tube into plastic
EN
base side with screw holes inside and
fix 4 screws as drawing.
B. Seat assembly
Hook the seat onto the seat support
1.
located on top of frame (ensure that two
female slots of seat support are
a lined with corresponding male pieces
on seat).
Secure seat with axel rod and attach
2.
clips on correct side.
3. To install footrest, starting from the left,
insert part of footrest, then insert other
part of footrest on the right side.
Continue simultaneously left to right until
footrest is inserted completely.
ASSEMBLING
12