General Safety Instructions; Symbols Used In This Guide; Importance Of This Guide; Envisaged Use - Erreka CLEVER02(M) Manual Del Instalador

GENERAL SAFETY INSTRUCTIONS

1

SYMBOLS USED IN THIS GUIDE

This guide uses symbols to highlight specific texts. The
functions of each symbol are explained below:

Failure to respect the safety warnings could
lead to accident or injury.
O
Instructions which must be followed to prevent
deterioration.
2

IMPORTANCE OF THIS GUIDE

 Read this guide in its entirety before carrying
out the installation, and obey all instructions.
Failure to do so may result in a defective
installation, leading to accidents and failures.
3

ENVISAGED USE

This device has been designed for installation as part of
an opening and closing system for shutter gates.

This device is not suitable for installation in
inflammable or explosive environments.
4

INSTALLER'S QUALIFICATIONS


Installation should be completed by a professional installer, complying with the following
requirements:
• He/she must be capable of carrying out
mechanical assemblies in doors and gates,
choosing and implementing attachment
systems in line with the assembly surface
(metal, wood, brick, etc) and the weight and
effort of the mechanism.
5

AUTOMATIC KEY DEVICE SAFETY ELEMENTS


The safe and correct operation of the
installation is the responsibility of the installer.
This device complies with all current safety regulations.
However, the complete system comprises, apart from
the control panel referred to in these instructions, other
elements which should be acquired separately.
26
Installation Guide

Work sequences or procedures.

Important details which must be respected for
correct assembly and operation.

Additional information to help the installer.
}
Information on care for the environment.

Moreover, this guide provides valuable information
which will help you to carry out installation more
efficiently.

This guide is an integral part of the product. Keep
for future reference.
 Failure to install or use as indicated in this
guide is inappropriate and hazardous, and
could lead to accidents or failures.

The installer shall be responsible for ensuring
the facility is set up for its envisaged use.
• He/she must be capable of carrying out
simple electrical installations in line with the
low voltage regulations and applicable
standards.
 Installation should be carried out bearing in
mind standards EN 13241-1 and EN 12453.

The safety of the complete installation depends on
all the elements installed. Install only Erreka
components in order
operation.

Respect the instructions for all the elements
positioned in the installation.

We recommend installing safety elements.
to guarantee proper