Introduction; Specifications; Preparing The Product For Use; Unpacking - Jacto HH-5 Manual Del Operador

SAVE THESE INSTRUCTIONS: This manual contains important
safety instructions for the proper use and maintenance of this
product.

1. Introduction

This manual contains information for the proper assembly, op-
eration and care of your sprayer. Carefully read and follow the
instructions contained in this manual before using your sprayer.
This equipment was designed for spraying plants protection
products approved by regulatory authorities to be used in com-
pression sprayer.

2. Specifications

Model
Net weight
Gross weight
Spray lance length
Hose length
Chemical tank
Capacity
Material
Pump
Type
Maximum pressure
Nozzle installed
Material

3. Preparing the Product For Use

3.1. Unpacking

Remove from the sprayer carton the following parts:
Hose
Trigger valve
Handle
Lance
Shoulder strap
Tank
Operator's Manual - English
Manual del Operador - Español (9)
COMPRESSION SPRAYER JACTO HH-5
Manual
Manufactured by INTERMAN Corporation Ltd. Customer attendance: Dr. Luiz
under license of Máquinas Agrícolas Jacto S.A. Miranda, 1650, 175780-000 –
Rojana Industrial Park (Rayong) Pompeia – SP – Brazil.
3/3, Moo 2, Bankhai-Banbueng Rd.T. Phone: +55 14 3405 2113. Email:
Nongbua. assistencia.tecnicajsfs@jacto.com
A.Bankhai Rayong 21120 - Thailand Opening Hours: Monday to Friday
E-mail: jacto@jacto.com.br / export@jacto. 7:00am to 11:30am and 13:00pm to
com.br 17:18pm (Brazilian time zone
Jacto HH-5
3.3 lbs. (1.5 Kg)
4.1 lbs. (1.9 Kg)
13.7 in. (350 mm)
65 in (1650 mm)
1.3 gal. (5 liters)
Polyethylene
Piston
35 PSI (2.4 Bar)
Blue adjustable cone
Polyethylene
Code: 1222825
2 languages - 10/2015
).

3.2. Attaching the hose to the tank

• Insert into the tank the part showed below and secure it with
the screw cap.

3.3. Attaching the lance to the trigger valve

• Insert the lance into the trigger valve and secure it with the
screw cap.
Lance

3.4. Filling the tank and preparing to spray

1. Put the sprayer on a flat surface and remove all the inter-
nal tank pressure by lifting up on the pressure relief valve;
2. Pull the handle down, lock it in the cylinder and turn the
handle counter-clockwise to remove the cylinder;
Trigger
valve
3/21