Warranty
Fault
Different blinds running at different speeds
Blind does not work
11
Warranty
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country or your retailer. You can find your authorised
customer service centre at dometic.com.
For repair and warranty processing, please include the following information when
you return the product:
• The number on the product label located for BR versions on the tube under the
fabric, for MP versions on the back of the mounting profile and for CA versions on
the back of the cassette.
• A reason for the claim or description of the fault.
If it is not possible to return the product, please provide photographs or video
identifying the defect.
12
Disposal
➤ If possible, dispose of the packaging material in the appropriate recycling
container.
➤ If you wish to finally dispose of the product, ask your local recycling centre or
specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
14
Solution
➤ Refer to manual of your control device
(e.g. AP Remote control).
➤ Check the power supply to the blind.
Prolonged or repeated use can activate the
built-in thermal cut-out.
➤ Leave the motor to cool for 20 min and
try again.
If using an AP Remote control:
➤ Refer to the AP Remote control manual.
Rollerblind Powered
EN