Orthofix Cervical Stim 5505 Manual De Instrucciones página 8

Follow these steps to recharge the battery:
1. Open the Charging Port Cover.
2. Plug the Charging Connector into the Charging Port located on the
Control Unit.
3. Plug the power supply into any standard AC Wall Outlet. Do not plug in
the power supply for CervicalStim where it will be difficult to unplug.
4. The LED on the power supply will light up green as an indicator that the
AC Wall Outlet is delivering power.
5. The Control Unit LCD will display a battery symbol filling to verify that
the device is charging. When the battery reaches a complete charge,
a check mark symbol will be displayed next to the battery symbol. In
addition, the device will beep once to alert the patient.
6. If the battery is fully depleted, it may require up to 4 hours to charge
completely.
7. After charging is complete, remove the Charging Connector and replace
the Charging Port Cover.
Charging
Connector
2
1
Charging Port Cover
Power Supply
Control
Unit
5
3
AC Wall
Outlet
4