Attachment To A Tripod Mount; Special Instructions For Minox Bn 7X50 C; Inserting And Changing The Batteries - MINOX BN 7x50 C Manual De Instrucciones

(as purchased) when looking through the binoculars.
In this condition the pupil of your eye is at the
correct distance to the ocular lens. This adjustment
also ensures a steady positioning of the binoculars
against the eye and minimizes stray light. When
looking through your MINOX BN 7x50 C / BN 7x50
wearing glasses you must fold down the rubber
eyecups to enable you to see the entire field of view
right into the edges.
Warning: Do not use your MINOX binoculars to look
at the sun or other bright sources of light to prevent
any eye injury.

Attachment to a tripod mount

To ensure steady and fatigue-free viewing you can
mount your MINOX BN 7x50 C / BN 7x50 on a tripod
using the tripod thread integrated in the body. For
this purpose we recommend the MINOX tripod mount
(order number 69727) that is available from our range
of accessories.
To use the tripod mount first remove the cap screw
(6) from the tripod thread on the underside of the MI-
NOX BN 7x50 C / BN 7x50. Connect the MINOX tripod
mount to the thread turning it in clockwise direction.
22
Keep the cap screw (6) in a safe place and screw it
back into the tripod thread after removing the tripod
mount.
Special instructions for
MINOX BN 7x50 C

Inserting and changing the batteries

Your MINOX BN 7x50 C has a compass with a display
that can be illuminated in the dark at the press of a
button. For this the compass requires two batteries
of the type LR 43x2.
To insert or replace the batteries proceed as follows:
1. Open the screw cap on the battery compartment
on the bottom of the binoculars by turning it in
counterclockwise direction (Fig.1)
2. Take the old batteries out of the battery compart-
ment. (Fig. 2) and insert two new batteries of type
LR 43 in the battery compartment (pay attention
to correct poling).
3. Tighten the screw cap on the battery compartment
again by turning it in clockwise direction.