Declaration Of Conformity - ALLURIS SMT-200C Instrucciones De Servicio

Declaration of Conformity

Manufacturer:
Product:
Model Nos.:
We hereby confirm that the product complies with the requirements of the
EMC Directive 92/336/EEC and for laser products EN 60825-1 Class 2
(Model No.. with suffix L only)
The compliance to the requirements of all relevant EEC directives is
confirmed by the CE-marking of the product.
Calibration Confirmation
We hereby confirm in accordance to DIN EN 10204, 2.1 that this instrument has been
tested in accordance with DIN EN 9001:2000 approved procedures. The instrument
meets all specified technical data's and the accuracy was tested better then stated in
the technical specification of the instrument.
The equipment used for test and calibration are traceable to the international
recommended and approved standards of the National Research Laboratory of
Metrology, Japan and the Institute of Standards, Prefecture Kyoto.
Manufacturer:
Model No.: .................................
Date of Purchase: ...................................
Nidec-Shimpo Corp.
Nagaokakyo City, Japan
on behalf of
Alluris GmbH & Co. KG
DE 79100 Freiburg, Germany
Digital Tachometer
SMT-200C; SMT-200L; SMT-200CL,
Nidec-Shimpo Corp.
Nagaokakyo City, Japan
Serial No.: ..................................