Declaration Of Conformity - ALLURIS FMT-100WT Instrucciones De Servicio

Declaration of Conformity

Manufacturer:
Alluris GmbH & Co. KG
Schlierbergstrasse 1
DE 79100 Freiburg, Germany
Product:
Digital Force Gauge „Wire Terminal Tester"
Model Nos.:
FMT-100WT; FMT-110WT
We hereby confirm that the product complies with the requirements of the EMC Directive 92/336/EEC and
conforms the following specification:
EMC Directive 92/336/EWG
EN 55022 (RF Emission)
EN 61000-4-2 (ESD)
EN 61000-4-3 (RF Field)
EN 61000-4-4 (Burst)
EN 61000-4-8 (Magn. Field)
The compliance to the requirements of all relevant EEC directives is confirmed by the CE-marking of the
product.
Calibration confirmation
We hereby confirm in accordance to DIN EN 10204, 2.1 that this instrument has been tested in accordance with
DIN EN 9001:1994 approved procedures. The instrument meets all specified technical data's and the accuracy
was tested better +/- 0,5% (+/- ½ last significant digit).
The equipment and weights used for test and calibration are traceable to the international recommended and
approved standards of the DKD Deutscher Kalibrierdienst at the Physikalisch-Technischen Bundesanstalt
(PTB).
Manufacturer:
Alluris GmbH & Co. KG
Freiburg, Germany
Model No.: ..............................................
Serial No.: ...............................................
Date of Purchase: ...................................
Class B
Criteria A
Criteria A
Criteria A
Criteria A
54