Sunset Function; To Use - Beurer WL 90 Manual De Instrucciones

• Switching button tones on/off

• Sunset function

Bluetooth® Speaker
To activate the Bluetooth speaker, it must be paired first:
1. Make sure app is not open.
2. Press the MODE/ENTER Button twice until "bt" appears on the LCD Display. This begins the Bluetooth
search.
3. In the Bluetooth settings on your smartphone, select "WL 90 Speaker" from the device list.
4. Once the Wake-up Light is paired, the blue Bluetooth logo will appear on the LCD Display.
5. Select the music function in the menu of the app.
6. Press the MODE/ENTER Button twice to deactivate the speaker. Close the app.
NOTICE
• After pairing for the first time, Bluetooth connection parameters for your smartphone will be saved.
Bluetooth pairing will occur automatically during subsequent usage when you start the music func-
tion in the LightUp app.
• Bluetooth Smart (low energy) is generally used; for example to control the light and alarm functions.
For music playback, Classic Bluetooth is also used. It is only here that the Bluetooth symbol appears
in the display of the Wake-up Light (Bluetooth connection is active or searching for connection).
Sunset function
The Wake-up Light can also be used to simulate a sunset, whereby the lamp slowly dims over a set period
of time. The sunset function can only be adjusted via the menu in the "Beurer LightUp" app.

6. To Use

The following basic functions can also be controlled directly without the app using the buttons on the
device, but only if the app on your smartphone is closed. For full functionality, control this device with the
"Beurer LightUp" app.
Setting the date and time
NOTICE
• When using the "Beurer LightUp" app, the time and date automatically synchronize with your
smartphone each time you use it; no manual time and date setting is needed.
1. Press and hold the MODE / ENTER button for three seconds.
2. "12" flashes in the LCD Display. Set the time display mode (12 or 24 hour) using the ▲ / ▼ buttons.
Confirm with the MODE / ENTER button.
3. The hour field flashes in the LCD Display. Set the hour using the ▲ / ▼ buttons. Confirm with the MODE
/ ENTER button.
4. The minute field flashes in the LCD Display. Set the minutes using the ▲ / ▼ buttons. Confirm with the
MODE / ENTER button.
5. The year field flashes in the LCD Display. Set the year using the ▲ / ▼ buttons. Confirm with the MODE
/ ENTER button.
6. The month field flashes in the LCD Display. Set the month using the ▲ / ▼ buttons. Confirm with the
MODE / ENTER button.
7. The day field flashes in the LCD Display. Set the day using the ▲ / ▼ buttons. Confirm with the MODE
/ ENTER button. The set time will display.
5