1
4
10
INSERTING THE BATTERY
Your camera requires one 3V lithium bat-
tery, type CR123A/DL 123A.
To insert the battery:
1 Move the battery compartment cover
2
release knob in the direction of the
arrow.
2 Flip open the battery compartment
cover.
3 Insert the battery following the instruc-
tions shown in the diagram on the in-
side of the battery compartment cover.
Important: Pay careful attention to the
polarity of the battery as indicated by the
, and . markings on the battery. The
battery must be inserted the correct way
or the camera will not function.
3
4 When the battery has been inserted cor-
rectly, close the battery compartment
cover by pressing it until it snaps into
place. If it does not snap into place, do
not force it but recheck the position of
the battery to make sure it fits properly.
ENGLISH
COLOCACIÓN DE LA PILA
Su cámara utiliza una pila de litio de
3V CR123A/DL 123A.
Para cargar la pila:
1 Deslice el botón para abrir la tapa del
compartimento de la pila.
2 Abra la tapa del compartimento de la
pila.
3 Inserte la pila siguiendo las instruccio-
nes que se indican en la parte interior
de la tapa del compartimento de la pila,
prestando especial atención a la posi-
ción de los polos , y ..
4 Una vez insertada la pila de forma
correcta, cierre la tapa del comparti-
mento de la pila de modo que quede
bien trabada.
ESPAÑOL